Introduction – Pure Air
The Pure Air electric scooters are powered by a 500W rear wheel motor and 280 Wh battery. The motor can reach up to 15.5 miles per hour, while the battery offers a range of up to 18.6 mile (30 km) on a single charge. The scooters also feature a folding design for easy storage and transport and front and rear suspension for a smooth ride. The pure air electric scooter manual has a lot of detail about its product.
It is good to see that they offer a folding design and lithium battery. This will make it easy for users to store and transport the scooter. The front and rear suspension is also a nice touch, as it will help smooth the ride. However, it would be helpful to see more information on the speed and range of the scooter. This would give potential buyers a better idea of what to expect from the product.
One of the best features of Pure Air electric scooters is that they come with a brushless DC motor. This is a great feature as it speeds up to 15.5 miles per hour. Additionally, the battery offers a range of up to 18 miles on a single charge. The maintenance of this scooter is very important; therefore, in the manual, they have a lot of detail about their product and how to take care of it.
Pure Air Electric Scooter Manual & Maintenance
Here’s a quick Pure air electric scooter manual & maintenance guide to help you keep your scooter in top condition. The Pure has air filled tires with puncture resistant fluid. We’ve talked about this type of fluid before on this site. When a puncture occurs, the interior fluid is drawn to the hole such that it ends up sealing the hole. The tire should still be repaired at some point. However, the immediate self-healing aspect of the puncture resistant fluid is incredibly cool. If you don’t have puncture resistant fluid, you can buy your own and inject it through the air intake.
Check the tires periodically to make sure they’re inflated properly at the right pressure of 36 psi. You should also regularly inspect the brakes and brake pads to ensure they’re in good working order. It’s also important to monitor the battery life and charge it regularly. Once a month, you should clean the Pure air electric scooter with soap and water to remove any dirt or debris that could build up over time and cause problems.
One of the best features of the Pure air electric scooter is its folding joints. This makes it easy to store and transport. However, it’s important to ensure that the joints are properly lubricated to prevent them from sticking or binding. You can use a silicone-based lubricant or WD-40 to lubricate the joints. The manual supplied in the box will have more specific instructions on how to do this. Additional upgrade parts such as a seat, basket, or lights can be purchased separately and added to the scooter.
Inspecting And Cleaning The Motor
The motor is the heart of the Pure air electric scooter, so keeping it clean and in good working order is important. You should inspect the motor regularly for any loose connections or damage. If you notice any problems, be sure to contact customer service. To clean the motor, simply wipe it down with a damp cloth. The scooter has IP65 water resistance rating which means it withstands strong jets of water. However, the IP rating isn’t high enough such that you can submerge the scooter into water for more than 30 minutes and expect it to keep working.
As mentioned above, the Pure air electric scooter has two brakes – a front brake and a rear brake. The front is a regular drum brake whereas the rear is an Electronic KERS brake that has regenerative braking feature. When the rider engages the brakes, the KERS system recovers energy back into the battery. However, we don’t know whether this mechanism is truly efficient. It’s important to check both regularly to ensure they’re in good working order. If you notice any issues with the brakes, be sure to take the scooter to a qualified technician for repair or replacement. Scooters with a disc brake system will require more frequent maintenance than those with a drum brake system.
The first thing you need to do is check the pressure of your tires at least once a week. You can do this with a simple tyre pressure gauge. If the pressure is low, add air until it reaches the recommended level.
Next, take a look at the tread on your tires. If the tread is wearing down, it’s time to replace them. You can check the depth of the tread by using a tread depth gauge. The minimum depth should be 4mm.
Finally, ensure that the bolts that hold your tires are tight. Loose bolts can cause problems when driving, so it’s important to check them regularly and tighten them if necessary.
The Pure air electric scooter has two lights – a headlight and a taillight, both of which are LED types. Both of these need to be in good working order for safety. Check the bulbs regularly to make sure they’re not burnt out. If they are, replace them with new bulbs.
The battery on your electric scooter gives it power, so it’s important to take care of it. First, check the battery level regularly and recharge it when it gets low. Second, keep an eye on the condition of the battery. If it shows signs of wear or damage, replace it with a new one. Advances in battery technology have made it possible to get a longer life out of batteries, so check for new battery options when shopping for replacements.
All batteries, however, will eventually need to be replaced. When this time comes, be sure to recycle the old battery properly. Most Li-Batteries have a “core charge” that can be refunded when you recycle the battery. Check with your local waste management company for more information on recycling batteries.
Don’t let your battery’s charge run down too much, as this will reduce its longevity. Try to keep it above 20% when not in use. The average lifespan of an electric scooter battery is about 500 cycles or 2-3 years, but this can vary depending on the quality of the battery and how well it’s cared for.
Charging your electric scooter regularly is important to keep the battery in good condition. Most scooters come with a standard charger, but you may want to consider an upgraded charger that can charge the battery faster. Using the charger that comes with the Pure Air, expect charging times of 5.5 Hours (using the charger included with scooter).
When charging, be sure to follow the instructions in the manual.
It’s important to keep your scooter clean to prevent dirt and debris from building up and causing problems. Once a month, wash the scooter with soap and water. Be sure to pay special attention to the wheels, as they can get very dirty.
After washing, dry the scooter with a soft cloth. Do not use a power washer or hose to clean your scooter, as this can damage it. In addition to washing the scooter, clean the chain regularly. This will help keep it in good condition and prevent it from rusting. To clean the chain, wipe it down with a rag soaked in a degreaser.
These are just a few things you need to do to keep your Pure air electric scooter in good working order. By following these simple tips, you can ensure that your scooter will provide years of trouble-free service.
You can also read: